CAMERON SERIES 164 - Click here for more

Standard Features Single Speed Motors with Three Spindle Speeds:
9,500; 17,000; 30,000 RPM (Optional Speed Controls are available for lower RPM settings)

• Smooth Rack and Pinion Feed
• Drills Small Holes (0.002" TO 5/32")
• Can Drill to the Center Of A 5" Work Piece
• Spindle Run Out at the Chuck Mounting Taper is within 0.0002"
• Dynamically Balanced Spindles, Pulleys and Motors for smoothness in operation
• Clear Plastic Safety Guard for viewing belt & pulley position
• Slotted 4" x 4" work table with 5/8" center hole

• Distance from the spindle center to the edge of supporting columns is 8"
• Spindle Run Out at Mounting Taper is Within 0.0002"
• Working Area of Drilling Table is 6-7/8" wide by 11-3/8"
• Single Speed Motor with Three Spindle Speeds of 9,500; 17,000; 30,000 RPM
  (Speed Controls are available for lower RPM settings)
• Drills Small Holes from 0.002" to 5/32"
• Maximum Distance from Chuck Jaws to Work Table is 5"
• Spindles, Pulleys and Motors are Dynamically Balanced for Smoothness in Operation
• Guard of Clear Plastic for Viewing Belt & Pulley Position
• Shipping weight 36lbs.

CAMERON MD-90 MICRO MAX - Click here for more

Turn Your BRIDGEPORT-TYPE MILLING MACHINE Into an Ultra-Precision Small-Hole Drilling Unit!

The CAMERON MD-90 Micro Max adapts to a 3/4" collet and has a Special Feature to
Lock Down the standard 3-3/8" quill to the 1-7/8" spindle of your milling machine. This
special lockdown feature prevents the spindle from turning. By combining the CAMERON MD-90 Micro Max with your Standard Milling Machine, you create a Rigid Small-Hole Drilling Unit.

The Optional Precision Ground Base converts the Micro Max into a table model;
Two Machines in One!