 |
Click on the picture for a full size image.
- Distance from the spindle center to the edge of supporting
columns is 8"
- Spindle Run Out at Mounting Taper is Within 0.0002"
- Working Area of Drilling Table is 6-7/8" wide
by 11-3/8"
- Single Speed Motor with Three Spindle Speeds of 9,500;
17,000; 30,000 RPM
(Speed Controls are available for lower RPM settings)
- Drills Small Holes from 0.002" to 5/32"
- Maximum Distance from Chuck Jaws to Work Table is 5"
- Spindles, Pulleys and Motors are Dynamically Balanced
for Smoothness in Operation
- Guard of Clear Plastic for Viewing Belt & Pulley
Position
- Shipping weight 36lbs.
|
