|
Standard Features Single Speed Motors
with Three Spindle Speeds:
9,500; 17,000; 30,000 RPM (Optional Speed Controls are available
for lower RPM settings)
- Smooth Rack and Pinion Feed
- Drills Small Holes (0.002" TO 5/32")
- Can Drill to the Center Of A 5"
Work Piece
- Spindle Run Out at the Chuck Mounting
Taper is within 0.0001"
- Dynamically Balanced Spindles, Pulleys
and Motors for smoothness in operation
- Clear Plastic Safety Guard for viewing
belt & pulley position
- Slotted 4" x 4" work table
with 5/8" center hole
|
