CNC MICRO MACHINING CENTER-S

Click on the picture for a full size image.

• Axis Travel: X = 6”, Y = 4”, Z = 7”(150mm x 100mm x 171mm)
• Machine footprint is 18” x 20” (460mm x 510mm)
• X-Y Stage Top Plate size is 5.5” x 6” (140mm x 150mm)
• Traverse rates up to 80ipm
• Spindle run out is less than 1 micron (39.37 microinches)
• Spindle speeds from 2,000 to 50,000 rpm
• A 350W Brushless Motor drives the Spindle.
• Includes either a 2mm, 3mm, 1/8" (3.175mm) or 4mm collet
• Axis resolution is 0.0001” (.0025mm)
• Axis repeatability is 0.0002” (0.005mm)
• Drill holes from 0.158" to 0.002" diameter (4mm to 0.0508mm)
• Nema 23 Servo motors on each axis (155oz/in peak torque)
• Protective enclosure with vacuum nozzle
• FlashCut CNC Control Software
• Laptop computer included with Control Software

Contact us for Pricing

CNC MICRO MACHINING CENTER-S

with Fourth Axis Option

Includes tailstock, right angle bracket, base plate, fixtures, mounting, motor and drive.

CNC MICRO MACHINING CENTER-TC with 4 Station Tool Changer

Click on the picture for a full size image.

• Axis Travel for the X, Y and Z is 6”, 4”, 5.5 ” (150 x 100 x 134), respectively
• Machine footprint is 18” x 20” (460mm x 510mm)
• X-Y Stage Top Plate size is 5.5” x 6” (140mm x 150mm)
• Traverse rates up to 80ipm
• Spindle run out is less than 2 micron (78.74 microinches)
• Spindle speeds from 2,000 to 50,000 rpm
• A 350W Brushless Motor drives the Spindle.
• Includes either a 2mm, 3mm, 1/8" (3.175mm) or 4mm collet
• Air actuated tool release from collet
• 4 position Automatic Tool Changer
• Axis resolution is 0.0001” (.0025mm)
• Axis repeatability is 0.0002” (0.005mm)
• Drill holes from 0.158" to 0.002" diameter (4mm to 0.0508mm)
• Nema 23 Servo motors on each axis (155oz/in peak torque)
• Protective enclosure with vacuum nozzle
• FlashCut CNC Control Software
• Laptop computer included with Control Software

CNC MICRO MACHINING CENTER-E

Click on the picture for a PDF Specification sheet.

• Axis Travel: X = 6”, Y = 4”, Z = 4 ”(150mm x 100mm x 100mm)
• Machine footprint is 18” x 20” (460mm x 510mm)
• Work Table: 5.5” x 6” (140mm x 150mm)
• Traverse rates up to 20ipm
• Spindle run out is less than 2 micron
• Spindle speeds up to 30,000 rpm
• A 125W Brushless Motor drives the Spindle.
• Includes a 1mm & a 1/8" (3.175mm) collet
• Axis resolution is 0.0001” (.0025mm)
• Axis repeatability is 0.0005” (0.0127mm)
• Drill holes from 0.002" to 1/4" diameter
• Stepper motors on each axis
• Optional Protective enclosure
• FlashCut CNC Control Software
• Laptop computer included with Control Software