CAMERON 164-CS - Click here for more

Standard Features Single Speed Motors with Three Spindle Speeds:
9,500; 17,000; 30,000 RPM (Optional Speed Controls are available for lower RPM settings)

• The Collet Spindle allows for even more precisely concentric small holes and even allows for some light manual milling.
• Smooth Rack and Pinion Feed
• Drills Small Holes (0.002" TO 5/32")
• Can Drill to the Center Of A 5" Work Piece
• Spindle Run Out at the Collet is less than 0.0001"
• Dynamically Balanced Spindles, Pulleys and Motors for smoothness in operation
• Clear Plastic Safety Guard for viewing belt & pulley position
• Slotted 4" x 4" work table with 5/8" center hole

• The Collet Spindle allows for even more precisely concentric small holes and even allows for some light manual milling.
• Distance from the spindle center to the edge of supporting columns is 8"
• Spindle Run Out at Mounting Taper is Within 0.0001"
• Working Area of Drilling Table is 6-7/8" wide by 11-3/8"
• Single Speed Motor with Three Spindle Speeds of 9,500; 17,000; 30,000 RPM
  (Speed Controls are available for lower RPM settings)
• Drills Small Holes from 0.002" to 5/32"
• Maximum Distance from Chuck Jaws to Work Table is 5"
• Spindles, Pulleys and Motors are Dynamically Balanced for Smoothness in Operation
• Guard of Clear Plastic for Viewing Belt & Pulley Position
• Shipping weight 36lbs.

(picture shows Chuck - Collet picture coming soon)

CAMERON MD-90 MICRO MAX - Click here for more

Turn Your BRIDGEPORT-TYPE MILLING MACHINE Into an Ultra-Precision Small-Hole Drilling Unit!

The CAMERON MD-90 Micro Max adapts to a 3/4" collet and has a Special Feature to
Lock Down the standard 3-3/8" quill to the 1-7/8" spindle of your milling machine. This
special lockdown feature prevents the spindle from turning. By combining the CAMERON MD-90 Micro Max with your Standard Milling Machine, you create a Rigid Small-Hole Drilling Unit.

The Collet Spindle allows for even more precisely concentric small holes and even allows for some light manual milling.

The Optional Precision Ground Base converts the Micro Max into a table model;
Two Machines in One!

(picture shows Chuck - Collet picture coming soon)